Author name: Wiztem-Mademoto

1. First adjust the height of the saddle and handlebars to make them in the safest and most comfortable position, especially the height of the saddle. It is best that both feet can touch the ground at the same time when you need to stop during riding. 2. Test whether the braking device is effective […]

1. The whole car is out of power-the main fault is that the battery is welded, the insurance is burned, the power cord and the battery socket are disconnected, the contact is poor, and the converter is damaged. No major problems will occur. 2. Don’t go if there is electricity. Under normal circumstances, you should

1. The bolts and nuts fastened to the bicycle should be tightened and not loose or fall off. 2. The rotating parts should operate flexibly, and there should be no jamming or staleness. For example, the front and rear wheels should rotate flexibly, and they should not swing left and right and jump up and

1. Before leaving the car every day, check whether the power is sufficient, whether the braking performance is good, whether the screws are loose, etc., if there is a fault, it should be repaired and eliminated in time, and the car can only be driven after the inspection is completed and there is no fault;

Vehicle maintenance includes checking whether all the screws and nuts of the vehicle are firm, whether the control performance is good, whether the tires need to be replaced, whether the mechanical system is in good condition, whether the battery capacity meets the standard, and the brush motor is repaired once a year. Fill in carefully

For people who often drive electric vehicles, mastering the charging method and charging frequency is the key. Early electric vehicles were driven by batteries. However, with the emergence of lithium batteries with better performance, batteries will gradually withdraw from the stage of history, and people’s focus will gradually shift to the maintenance of lithium batteries.

Electric vehicles should be cleaned in accordance with normal car washing methods. During the cleaning process, care should be taken to avoid water flowing into the charging socket of the car body and avoid short circuit of the car body line. In the following situations, the paint layer will peel off or the body and

During use, you should accurately grasp the charging time according to the actual situation, refer to the usual frequency of use and mileage, and grasp the frequency of charging. During normal driving, if the electricity meter indicates that the red and yellow lights are on, it should be charged; if only the red light is

1. It should be fully charged before use. Newly purchased electric vehicles should be fully charged before use. Because many electric vehicles have been stored in stores for several months, or even more than half a year, they must be fully charged before using them. It is best not to use them immediately after fully

(1) Before riding, check whether the battery box is locked firmly and whether the lights on the display panel are normal. (2) When driving on a water-filled road in rainy weather, drive normally under the condition that the depth of the water does not exceed the center of the electric wheel. If the water depth